BrenTuning Moto Flash ECU Custom Mapping - BMW R nineT 2014-2020

BMW Handheld Tuner with Custom Mapping

No need to send in your ECU or remove it from your bike at all. You order the handheld, it gets delivered to you, you flash your bike. You never miss a day of riding and no effort removing the ECU.

Stage 1 was focused on derestricting the R nineT. Stage 2 is optimized for best performance at all times without sacrificing reliability or rideability. We left no stone unturned in our Stage 2 development and spent hours, days, and months to perfect Stage 2 with our R&D.

WHAT STAGE 2 INCLUDES:

• 10% horsepower gain / 10% torque on pump fuel
• Smoothing of the part throttle rideability and idle
• Ability to ride bike at lower or mid-RPM’s without bucking and jerking found in factory tune
• We changed the EGT (exhaust gas temperatures) tables for maximum performance
• Lower fan-on temperatures
• Aggressive ABS / DTC bike intervention for more experienced rider looking to shave seconds at the track
• Stronger idle speed to combat stalling on warm up
• Torque limit tables in dynamic mode have all been raised to give you maximum performance
• Reshaped torque model for more power at all RPM’s part or full-throttle
• 4-mode tuning (If applicable)
• Ignition timing tables optimized for every fuel
• Conversion to lambda
• Full-throttle limiters removed
• Engine braking in all modes
• Cold and warm start issues eliminated
• Known flat spots removed from entire RPM range
• Speed and rev-limit adjusted for max power
• Throttle valve optimized
• Adaptation to race fuels
• Mapping available for aftermarket exhaust systems
• Exhaust valve on the stock system has been recalibrated for better sound and more power

Dyno Proven

Below, the stock model is represented by both RED lines, the BrenTuning Moto Stage 2 Flash is represented by the BLUE lines. You can see large gains over the entire RPM range and with the extended rev limiter, you’ll have less shifts at the track.

Q & A's

What does a BT Moto handheld tuner do?

The BT Moto handheld tuner stores multiple maps that you can change at any time. Unlike the mail-in ECU option, this means no downtime for your motorcycle while we do the flashing process. You can also go back to your stock mapping at any time you'd like and even read and clear engine faults. Additionally, some models will allow for DTC reading / clearing and maintenance light resets.

How does the BT Moto handheld tuning process work?
Easy, you purchase the handheld, we ship it to you. Use the BT Moto handheld tuner to copy your motorcycles stock file (motorcycle will still run fine after this) then email that to Motobull. BT Moto will then create a file from your stock mapping and we will email it back to you so can upload it to the handheld. Once uploaded you'll be able to flash your motorcycle with the BT Moto handheld tuner.

How do I put my motorcycle back to stock with the BT Moto handheld?
Go to "Work" -> "Writing" -> "Original" in the handheld and then it'll load the original factory stock file to your motorcycle.

Further product information can be found on the BT Moto web site:

  here

Motobull can supply the full range of BT Moto products, even if not currently listed in the web shop

We are happy to discuss your tuning requirements!